The setup pace of the experimental platform

The setup pace of the experimental platform:

Step: Check the height of the adjustment feet at the bottom of the cabinet, and rotate all the adjustment feet to a distance of 5mm from the ground for uneven adjustment.

Step 2: Place various types of cabinets in place according to the drawings and investigate whether the top table has any unevenness. If it is not flat, adjust the bottom foot of the cabinet and measure it with a level ruler to make it horizontal and vertical. After aligning the edges of the cabinet, connect it with screws or cap bolts. When connecting, pay attention to the flatness and unevenness of the surface, and each adjusting foot must be on the ground to accept gravity.

Step 3: After fixing the side sealing plate, you can enter the device on the countertop. If there are water tanks and reagent rack column holes on the countertop, open them before sticking to the countertop.